|
|
Dave, here are two photos of the coils mounted in their bracket. There are two lengths of 1/4 all thread that run through all the coils and the two end posts tying them together. The coils spaced on two inch centers by putting 1.5 inch long bushings over the all thread between the coils. Once the nuts were tightened this became a solid structure. This whole unit is removable by pulling two bolts in the bracket "receiver" which will be brazed to one of engine mount tubes. Some would not approve of attaching anything but the engine to the engine mount and I don't recommend anyone copy what I did. I do have an easy work a round that avoids all welding/brazing to the engine mount. Next message will be the bracket receiver. Jerry
P1010002.jpg
coil/bracket.JPG
P1010001.jpg
coils/bracket2.JPG
|
|