|
|
George,
If I understand correctly, the D850 is used on the LS1 in the corvette, and
the D851 is used on the LS1 engine used in trucks.
Joe
----- Original Message ----- From: "George Lendich" <lendich@optusnet.com.au>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Monday, September 12, 2005 2:45 AM
Subject: [FlyRotary] Re: Ignition Coil Connectors
Dale Joe,
Are these the LS1 Corvette ( GMC) and Truck coils?
George ( down under)
> Dale,
> It looked like the D851 had a slightly small footprint making layout a
bit
> easier. The EC-2 manual indicates both will work and I believe
somewhwere
I
> read Tracy was using the D851s on his Renesis. If I had it to do again,
it
> would have been the D850 since I now have connectors that will fit 850.
> Joe
> ----- Original Message -----
> From: "Dale Rogers" <dale.r@cox.net>
> To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
> Sent: Sunday, September 11, 2005 11:33 PM
> Subject: [FlyRotary] Re: Ignition Coil Connectors
>
>
> > Joe,
> >
> > Why did you choose the D851? I thought that the "standard"
> > was the D580 (AKA: GM # 12558948).
> >
> > Dale R.
> >
> >
> > > From: Joe Ewen <Jewen@Comporium.net>
> > > Date: 2005/09/11 Sun PM 10:43:17 EDT
> > > To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
> > > Subject: [FlyRotary] Ignition Coil Connectors
> > >
> > > Does anyone know a source and or part number on connectors that will
fit
> the Delco D851 coils. I tried the Waytek parts called out on the Wiki,
but
> they do not fit the D851.
> > >
> > > Thanks,
> > > Joe
> > >
> >
> >
> > --
> > Homepage: http://www.flyrotary.com/
> > Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
> >
>
>
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
>
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
|
|