X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from server3.alwayswebhosting.com ([66.98.204.64] verified) by logan.com (CommuniGate Pro SMTP 4.3.4) with ESMTPS id 980744 for flyrotary@lancaironline.net; Wed, 01 Jun 2005 13:22:45 -0400 Received-SPF: none receiver=logan.com; client-ip=66.98.204.64; envelope-from=bob@bob-white.com Received: from bgp01386375bgs.brodwy01.nm.comcast.net ([68.35.160.229]:32887 helo=quail) by server3.alwayswebhosting.com with smtp (Exim 4.50) id 1DdWuc-000770-9i for flyrotary@lancaironline.net; Wed, 01 Jun 2005 12:21:50 -0500 Date: Wed, 1 Jun 2005 11:21:57 -0600 From: Bob White To: "Rotary motors in aircraft" Subject: Re: [FlyRotary] Re: EC2 Cables Message-Id: <20050601112157.16b90f86.bob@bob-white.com> In-Reply-To: References: X-Mailer: Sylpheed version 1.9.12 (GTK+ 2.4.9; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - server3.alwayswebhosting.com X-AntiAbuse: Original Domain - lancaironline.net X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [47 12] X-AntiAbuse: Sender Address Domain - bob-white.com X-Source: X-Source-Args: X-Source-Dir: Hi Kelley, Yes on the crimped connectors, especially for the 15 pin connector. The connector shell could be left off for threading the cable thru the fuselage for the canard installations. Currently the EM2 leads are unterminated. If you have an early EM2 with a separate display, the EM2 data pins are already cabled by Tracy, and there are two wires you have to splice to. (I like the knife splice terminals for that sort of connection.) The single module unit could have the connector added, but it wouldn't help much as only two pins would be soldered (or crimped), and only one pin on the connector with the EFI signal. As soon as I can figure out how to specify cables for the EM2, the EC2 to EM2 connections could be included. Off the top of my head, the problem with the EM2 is that there are a lot more variables, and thermocouples are a particular problem. I haven't thought about it too much yet though. Bob W. On Wed, 01 Jun 2005 05:38:55 +0000 keltro@att.net (Kelly Troyer) wrote: > Bob, > Do you plan on offering the crimped pin connectors as an option ?? Also > will the leads for the EM2 be terminated with a connector ?? > > Thanks > -- > Kelly Troyer > Dyke Delta/13B/RD1C/EC2 > > > > > > > -------------- Original message from Bob White : -------------- > > > > > > Bob White wrote: > > > > > > >I want to thank everyone for their support and encouragement on this > > > >project. Any comments would be welcomed. I'm pretty much set up to > > > >make the cables, but I haven't received all the parts yet. I should be > > > >able to start late next week. -- http://www.bob-white.com N93BD - Rotary Powered BD-4 (real soon)