Mailing List flyrotary@lancaironline.net Message #22839
From: George Lendich <lendich@optusnet.com.au>
Subject: Re: [FlyRotary] Re: Renesis oil pan
Date: Wed, 1 Jun 2005 07:37:19 +1000
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Jerry,
If it were me, and I was making a oil pan from scratch, I would use the
largest volume either the RX 8 six port or 13B.
If I wanted to use 'off the shelf', I would use the largest volume that
would fit.
George ( down under)

Jerry,

I would feel better with the 6 port oil volume.

Bobby



-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Jerry Hey
Sent: Tuesday, May 31, 2005 8:45 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Renesis oil pan

Can anyone tell me if the Renesis pick up tube bolts up to the oil pump
the same as the 13 B?   I am trying to determine if I can use the  13 B
pick up tube in a custom oil pan for a Renesis.   If not, the Renesis
pick up tube will  have to be  modified.
FYI,The 13 B oil pan is two inches deeper than the Renesis pan and holds
158 oz.  The Renesis oil pan holds 96 oz.

   At oil change how much oil does the Renesis take?   The 13B takes 5
qts with filter.     Thanks,   Jerry






>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html


>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html




Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster