Nice looking work and a hell of a good deal Bob.  Even though I'm completely familiar with doing the job, I'd have Bob do it for me at that price. Tracy
  ----- Original Message -----   From: Bob White<mailto:bob@bob-white.com>   To: Rotary motors in aircraft<mailto:flyrotary@lancaironline.net>   Sent: Sunday, May 29, 2005 11:54 PM
  Subject: [FlyRotary] EC2 Cables


  I've finished the prototype EC2 cable, and I have a prototype web site
  set up.  Here's a photo.  The web site still needs some work, but if
  you want to take a look, it's at:
  http://www.roblin-photo.com/cable/cable.html<http://www.roblin-photo.com/cable/cable.html>

  There is a spreadsheet to adjust the price depending on how much wire
  you need to use.

  In case there is some detail in the photos of the connectors that will
  give me away, I want to mention up front that these are not the
  connectors I will be using in the production cables.  The good
  connectors are on the way.  these were some cheap substitutes I got at
  the local electronics store.

  I want to thank everyone for their support and encouragement on this
  project.  Any comments would be welcomed.  I'm pretty much set up to
  make the cables, but I haven't received all the parts yet.  I should be
  able to start late next week.


  Bob W.

  --   http://www.bob-white.com<http://www.bob-white.com/>
  N93BD - Rotary Powered BD-4 (real soon)