Received-SPF: none
 receiver=logan.com; client-ip=211.29.133.165; envelope-from=lendich@optusnet.com.au
Message-ID: <026001c55754$790e8030$e21decdc@george>
From: "George Lendich" <lendich@optusnet.com.au>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-916437@logan.com>
Subject: Re: [FlyRotary] Re: I need misc engine parts
Date: Fri, 13 May 2005 10:41:15 +1000
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Rusty,
Why would you need through bolts off a 13B for a single engine ?
Sounds like your building a single RX8 ( RX4).
George (down under)

> Russell Duffy wrote:
> 
> > Greetings,
> >  
> > For the single rotor project, I'm going to need a bunch of misc 
> > parts.  What would be ideal, is if I could get essentially an entire 
> > 2nd gen engine, minus the housings, rotors, and eshaft.  I don't 
> > really need any of the seals or springs either.  Basically, I need a 
> > front cover,  all the hardware (particularly through bolts- two sets 
> > of those if possible), gears, thrust washers, oil pump, pan, etc. 
> >  
> > Anyone got a bunch of this stuff laying around they'd like to sell? 
> >  
> > Thanks,
> > Rusty (you don't want to know what I'm planning now)
> 
> 
> If you need a front cover to practice on, I could send you one that has 
> a couple of extra pieces welded onto it.
> 
> -- 
>          ,|"|"|,  
> ----===<{{(oQo)}}>===----        Dyke Delta
>         o|  d  |o          www.ernest.isa-geek.org
> 
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>