X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from [216.52.245.18] (HELO ispwestemail2.mdeinc.com) by logan.com (CommuniGate Pro SMTP 4.3c5) with ESMTP id 936109 for flyrotary@lancaironline.net; Sat, 07 May 2005 19:03:20 -0400 Received-SPF: none receiver=logan.com; client-ip=216.52.245.18; envelope-from=wschertz@ispwest.com Received: from 7n7z201 (unverified [63.13.186.22]) by ispwestemail2.mdeinc.com (Vircom SMTPRS 4.1.361.0) with SMTP id for ; Sat, 7 May 2005 16:02:29 -0700 Message-ID: <031601c55358$d5a8bcc0$6401a8c0@7n7z201> From: "William" To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] Flow Separation Date: Sat, 7 May 2005 18:02:24 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0313_01C5532E.EC6ACB30" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.2180 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 This is a multi-part message in MIME format. ------=_NextPart_000_0313_01C5532E.EC6ACB30 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Ed, Consider putting a light layer of fiberglass on the inside, it will = greatly strengthen the structure, andprevent pieces from falling out. = (real light cloth) Bill Schertz KIS Cruiser # 4045 ----- Original Message -----=20 From: Ed Anderson=20 To: Rotary motors in aircraft=20 Sent: Saturday, May 07, 2005 4:08 PM Subject: [FlyRotary] Flow Separation Flew with the new duct this morning for 45 minutes. Cooling was much = better but not as good as I had expected with the enlarged inlet - after = I landed and examined the duct I discovered why. I glue foam sheets together to build up the depth of the duct I need, = shape the foam to get the contour I want and then fiberglass the out = side and put a protective layer of resin over the foam inside the duct.. = Well, this morning before going out to the hangar, I found out a seam = had opened between two sheets of foam - so I filled it with some bondo = type stuff, sanded it down, painted it and took it out and installed in = on the aircraft and went flying. After leveling off the coolant stayed between 190F and 200F - a bit = higher than I expected. So I limited the rpm to 6500 rpm. Throttling = back to 5000 rpm produced 170F. After landing I took the duct off and found what you see in = Separation1s.jpg photo. The seam had opened up again and the filler = material and not helped either. Can you spell FLOW SEPARATION? The = red lines enclose the area I suspect that I had flow separation due to = the obstruction. White arrow indicates direction of air flow. =20 My research indicates that slowing down the boundary layer (such as = these obstructions would) has a much more significant impact on cooling = than you might first think. The slowing of the boundary layer as it = encounters the positive pressure gradient (created as the duct expands = radically) can lead to a portion of the main flow "tumbling" over the = slower moving boundary layer forming "eddies" and effecting a much = larger area of flow than the small ridges would indicate. So I think a sizable area of the right half of the core(looking at it = from the front) may have been blocked or at least had its cooling = impaired by flow separation. Will fix the problem and fly again to see = if the cooling changes. Ed Anderson Rv-6A N494BW Rotary Powered Matthews, NC eanderson@carolina.rr.com -------------------------------------------------------------------------= ----- >> Homepage: http://www.flyrotary.com/ >> Archive: http://lancaironline.net/lists/flyrotary/List.html ------=_NextPart_000_0313_01C5532E.EC6ACB30 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Ed,
Consider putting a light layer of = fiberglass on the=20 inside, it will greatly strengthen the structure, andprevent pieces from = falling=20 out. (real light cloth)
Bill Schertz
KIS Cruiser # 4045
----- Original Message -----
From:=20 Ed=20 Anderson
Sent: Saturday, May 07, 2005 = 4:08=20 PM
Subject: [FlyRotary] Flow=20 Separation

Flew with the new duct this morning = for 45=20 minutes.  Cooling was much better but not as good as I had = expected with=20 the enlarged inlet - after I landed and examined the duct I discovered = why.
 
I glue foam sheets together to build = up the depth=20 of the duct I need, shape the foam to get the contour I want and then=20 fiberglass the out side and put a protective layer of resin over the = foam=20 inside the duct..  Well, this morning before going out to the = hangar,=20  I found out a seam had opened between two sheets of foam - so I = filled=20 it with some bondo type stuff, sanded it down, painted it and took it = out and=20 installed in on the aircraft and went flying.
After leveling off the coolant stayed = between=20 190F and  200F - a bit higher than I expected.  So I limited = the rpm=20 to 6500 rpm.  Throttling back to 5000 rpm produced = 170F.
 
After landing I took the duct off and = found what=20 you see in Separation1s.jpg photo.  The seam had opened up again = and the=20 filler material and not helped either.  Can you spell FLOW=20 SEPARATION?   The red lines enclose the area I suspect that = I had=20 flow separation due to the obstruction. White arrow indicates = direction=20 of air flow.  
 
 My research indicates that = slowing down the=20 boundary layer (such as these obstructions would) has a much more = significant=20 impact on cooling than you might first think.  The slowing of the = boundary layer as it encounters the positive pressure gradient = (created as the=20 duct expands radically) can lead to a portion of the main flow = "tumbling" over=20 the slower moving boundary layer forming "eddies" and effecting a = much=20 larger area of flow than the small ridges would indicate.
 
So I think a sizable area of the = right half of=20 the core(looking at it from the front) may have been blocked or at = least had=20 its cooling impaired by flow separation.  Will fix the problem = and fly=20 again to see if the cooling changes.
 
Ed Anderson
Rv-6A N494BW Rotary=20 Powered
Matthews, NC
eanderson@carolina.rr.com

>>  Homepage: =20 http://www.flyrotary.com/
>>  Archive:  =20 = http://lancaironline.net/lists/flyrotary/List.html
------=_NextPart_000_0313_01C5532E.EC6ACB30--