|
|
Dave, this is just My opinion. But, I believe the stainless steel braid
covering does provide "some" resistance to flames over say the rubber and
thread type hoses which I believe definably need the FireSleeves. The only
place I have FireSleeve is on the length of aluminum tubing I have in the
secondary fuel rail of my injectors (cut down a stock fuel rail and insert
the aluminum tube to get the length needed). I felt aluminum tubing in
particular is very susceptible to melting in a fire.
Ed
----- Original Message -----
From: "David Staten" <Dastaten@earthlink.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, April 14, 2005 9:21 AM
Subject: [FlyRotary] Hoses: Firesleeve, stainless, bare?
I wanted to take this time to ping the group and determine a course of
action. I am getting ready to order my hoses and material and wanted to
inquire about firesleeving on oil and fuel lines. I have noticed several
pics that have just stainless braided lines on the engines. What is the
conventional wisdom... and what would an A&P do (if there are some here).
I am inclined to believe the stainless is more for looks, and abrasion
resistance... but doesn't really add much in the fire-proofing or
fire-resistance category. Aircraft Spruce sells firesleeving that is
supposed to give 15 minutes direct flame resistance.
Any guidance, experience or data would be appreciated.
Dave
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|