Received-SPF: none
 receiver=logan.com; client-ip=66.98.204.64; envelope-from=bob@bob-white.com
Date: Thu, 31 Mar 2005 20:17:55 -0700
From: Bob White <bob@bob-white.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Davies-Craig EWP Test Results
Message-Id: <20050331201755.69bddda9.bob@bob-white.com>
In-Reply-To: <list-831361@logan.com>
References: <list-831361@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Hi Rusty,

You're better off with the Davies-Craig than the WP136.  I guess I'll try the
WP337 for now.  I'm not sure it's as good as two WP136's but it's easier to
install.

I will ship your pump back tomorrow.

Bob W.


On Thu, 31 Mar 2005 07:25:58 -0600
"Russell Duffy" <13brv3@bellsouth.net> wrote:

> The tiny D-C pump outperforms the WP136.  
> 
> Great report Bob!  Sounds like the little plastic Davies Craig pump is the
> hands down winner over the WP136 Meziere.  I'm not too concerned about the
> motor temp, because it's obviously made to run that hot, and still give good
> service life.  The best part about the test is that you did it, and my WP136
> is still new in the box.  Now I can send it back to Summit for a refund :-)
> 
> Cheers,
> Rusty (hoping for two successful posts in a row)
> 


-- 
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (real soon)