|
|
I got Tracy's pumps and was able to convert the barb fitting on the output end with an AN-6 male nipple. The input end remains barbed, but that's OK since my selector valves and fuel flow transducer are barbed. There is no measurable pressure at all upstream of the pumps. It's all gravity feed at < 0.2 psi. I can get you part numbers for the Saginaw adapter I use if you want ... Jim S.
John Slade wrote:
I'm pretty sure I need a new fuel pump. Tracy only has the barb fitting type
right now. Did anyone identify a suitable pump from the after market -
summit, Jeg etc.
I seem to remember some talk of part numbers for adapters, but don't
remember seeing a pump recommendation.
I know Holley make one with AN6, but it's expensive.
John
Homepage: http://www.flyrotary.com/
Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|