Mailing List flyrotary@lancaironline.net Message #18672
From: David Staten <Dastaten@earthlink.net>
Subject: Re: [FlyRotary] Velocity build/13B install progresses
Date: Sun, 13 Mar 2005 07:20:31 -0600
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message

Views of the adapter plate with the AN4/ 1/4 inch bolts being inserted in from the engine side... and the 10 mm bolts being inserted from the opposite side.

Two views of the adapter plate being mounted to the block. Note to self.. when you paint the block.. put bolts in ALL the holes so you dont have to tap out two of em to get all the paint out... OOOOPS... I wish I'd thought of that 4 months ago..
Image
adapt4.JPG
Image
adaptmount.JPG
Image
adaptmnt4.JPG
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster