|
|
The calibration setting on the EM2 was 156. The manual doesn't cover how
much change to make. Do I simply apply the percentage change and
reset it to
151.
i.e. 156 * (43.6 * 100)/45.1)/100) = 150.81
There's a couple of 100s in there you don't need, but the answer
is right.
I'd try that number in there and see if it works.
Oops. For the archives...I just reread the EM2 manual. Unless I'm reading it
wrong, the calibration number needs to be INCREASED if the burn is less than
the EM2 reading, so I need to change it to 161.
John (another 2hrs today)
|
|