flyrotary@lancaironline.net Mailing List Archive

Message

Thanks, Rusty. I pulled out the magnifying glass and found the following part numbers... 9211-171049 stamped on the injector. They do, however look very similar to the MSD injectors. (slight difference on the bottom where it inserts into the injector hole), but looks like the MSD would work. Thanks again. Paul Conner

----- Original Message -----

From: Russell Duffy

To: Rotary motors in aircraft

Sent: Sunday, February 27, 2005 10:53 PM

Subject: [FlyRotary] Re: Injector sources

     I

Hi Paul,

Here's a link to the TWM injector selection page.

http://www.twminduction.com/EFI/EFI-FR.html

You'll note that the next to the bottom injector is a 72 lb/hr, peak and hold Rochester injector, and I'm guessing this is what you have. The part number is 2900-2014, and I've found that these are also sold as MSD brand.

Summit's part number is MSD-2014, and they're in stock at $90.88 each. Here's the link: http://tinyurl.com/5uxzu

Cheers,

Rusty (bet you wish you had two injectors per rotor now)

No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.5.0 - Release Date: 2/25/2005

No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 266.5.0 - Release Date: 2/25/2005