Well, I checked my ignition with an inline
spark detector....spark on all 4 wires. I switched injector wires, and
the engine still ran on one rotor. Disconnected one injector, no change.
Reconnected and disconnected the other injector, and it would not
start. I looked at the injector, and there was fuel down in the recess
where the injector plug attaches. (partially submerging the two contact
pins). Looks like I need another injector.
I don't know the
manufacturer of the injector, or the best place to purchase one. I was told
by Dave Atkins (from whom I purchased the TWM throttlebody with the
injectors already installed) that they are 72 lb/hr peak and hold. The
injector has the letters RP on one side, and the numbers W D
6 on the other side. Any idea who makes/sells this
injector? See attached picture. Thanks in advance for any and
all replies. Paul Conner
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.5.0 - Release Date: 2/25/2005
Homepage: http://www.flyrotary.com/
Archive: http://lancaironline.net/lists/flyrotary/List.html