Well, I checked my ignition with an
inline spark detector....spark on all 4 wires. I switched injector
wires, and the engine still ran on one rotor. Disconnected one
injector, no change. Reconnected and disconnected the other injector,
and it would not start. I looked at the injector, and there was fuel
down in the recess where the injector plug attaches. (partially
submerging the two contact pins). Looks like I need another injector.
I don't know the manufacturer
of the injector, or the best place to purchase one. I was told by Dave
Atkins (from whom I purchased the TWM throttlebody with the injectors
already installed) that they are 72 lb/hr peak and hold. The injector
has the letters RP on one side, and the numbers W D 6 on the other
side. Any idea who makes/sells this injector? See attached picture.
Thanks in advance for any and all replies. Paul Conner
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.5.0 - Release Date: 2/25/2005
Homepage: http://www.flyrotary.com/
Archive: http://lancaironline.net/lists/flyrotary/List.html