|
Well, I checked my ignition with an inline spark
detector....spark on all 4 wires. I switched injector wires, and the
engine still ran on one rotor. Disconnected one injector, no change. Reconnected
and disconnected the other injector, and it would not start. I looked at
the injector, and there was fuel down in the recess where the injector plug
attaches. (partially submerging the two contact pins). Looks like I need
another injector.
I don't know the
manufacturer of the injector, or the best place to purchase one. I was told by
Dave Atkins (from whom I purchased the TWM throttlebody with the injectors
already installed) that they are 72 lb/hr peak and hold. The injector has
the letters RP on one side, and the numbers W D 6 on the other
side. Any idea who makes/sells this injector? See attached
picture. Thanks in advance for any and all replies. Paul
Conner
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.5.0 - Release Date: 2/25/2005
|