Received-SPF: pass
 receiver=logan.com; client-ip=64.102.122.149; envelope-from=echristl@cisco.com
Message-ID: <42077713.4080505@cisco.com>
Date: Mon, 07 Feb 2005 09:11:31 -0500
From: Ernest Christley <echristl@cisco.com>
User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.7.3) Gecko/20040929
MIME-Version: 1.0
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Cool Collar oil filter cooler
References: <list-710220@logan.com>
In-Reply-To: <list-710220@logan.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit

Paul wrote:

> Now, THAT'S why I enjoy being a member of this list...so many good 
> ideas shared.  Paul Conner
>
>     ----- Original Message -----
>     *From:* Russell Duffy <mailto:13brv3@bellsouth.net>
>     *To:* Rotary motors in aircraft <mailto:flyrotary@lancaironline.net>
>     *Sent:* Saturday, February 05, 2005 9:57 PM
>     *Subject:* [FlyRotary] Re: Cool Collar oil filter cooler
>
>     to drill a 1/4" hole through it and through the center of the oil
>     filter,
>     and secure with a 4 inch long 1/4" diameter bolt, that will go
>     right through
>     both. (Only kidding....I will use a 3/16" diameter bolt so not as
>     much oil
>     can leak out of the hole in the filter).
>
>      
>     Paul, 
>      
>     Before you mount the filter, just fill it with RTV, then you can
>     drill any size hole through it without leaking :-)
>      
>     Rusty
>      
>

Rusty, I'm ashamed of you.  You know, good and well, that ULTRA-GREY is 
the standard here!

8*)