----- Original Message -----
Sent: Saturday, February 05, 2005 9:57
PM
Subject: [FlyRotary] Re: Cool Collar oil
filter cooler
to drill a 1/4" hole through it and through the center of the
oil filter,
and secure with a 4 inch long 1/4" diameter bolt, that will go
right through
both. (Only kidding....I will use a 3/16" diameter bolt so
not as much oil
can leak out of the hole in the filter).
Paul,
Before you mount the
filter, just fill it with RTV, then you can drill any size hole through it
without leaking :-)
Rusty
No virus found in this incoming message.
Checked by AVG
Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.5 - Release Date:
2/3/2005