Received-SPF: pass
 receiver=logan.com; client-ip=205.152.59.66; envelope-from=sladerj@bellsouth.net
From: "John Slade" <sladerj@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>,
	<prvt_pilot@yahoo.com>
Subject: RE: [FlyRotary] Re: Disappointing Day
Date: Wed, 2 Feb 2005 17:22:04 -0500
Message-ID: <NMELKLCBIAJLEHHCHLJBKEIJEBAA.sladerj@bellsouth.net>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
In-Reply-To: <list-655996@logan.com>
Importance: Normal

No, the manual doesn't specify shielded cables, but lack of shielding is
what Tracy thinks is causing my data to get scrambled on the way from the
panel to the EC2 on the firewall.

> -----Original Message-----
> From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On
> Behalf Of Steve Brooks
> Sent: Wednesday, February 02, 2005 4:18 PM
> To: Rotary motors in aircraft
> Subject: [FlyRotary] Re: Disappointing Day
>
>
> Have you checked the graph of MAP values lately?
>
> Don't have that version of software, or the EM-2
>
> Where is your EC2 mounted?
> Cabin side of the firewall over the center spar.
>
> Do you have shielded wire to the control panel? no - I don't remember any
> requirement for stranded.  If any were specified I would have
> used stranded,
> but I don't recall any.  I have several runs of shielded wire in
> the plane,
> but I think that they are all in the avionics.  I could be wrong
> though, it
> has been a while since I wired it.
>
>
> Steve
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html