|
|
Would a lead scavenging additive like the Subi guys are running help
this problem.
Bobby Hughes -----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Ernest Christley
Sent: Tuesday, January 25, 2005 10:12 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: FW: Re: Plugs and Mags
Ed Anderson wrote:
I have save the plugs thinking I will clean them off and reuse them - but the normally cleaning ( blasting) will probably cause more wear
than usage.
Been looking for some solvent that would dissolve lead deposits without
eating the spark plug metal - have not found it yet.
Ed, you might try burning the lead out with an OA torch. Maybe try a
very lean flame. Keep the center cone of the flame off the metal
casing, and don't to let it get too hot. The platinum probably won't
even feel the heat. It should work to burn off carbon, too. Knew an
old guy who used to bake his plugs if they ever got flooded.
Homepage: http://www.flyrotary.com/
Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|