|
Hey, Rusty....I braved the 50 degree cold
temperatures and went to the hangar and removed the cowling to take these
pictures of the fitting I substituted for the banjo fitting. Originally, I took
a file and made the head of the motor mount bolt about 1/3 shorter to allow more
clearance for the banjo fitting. After I replaced the banjo fitting with
this adapter, I found I had a little more clearance. The Earl's aluminum female
swivel is fairly thin-walled, and there is more daylight between the fitting and
motor mount bolt now. I should have taken this picture from a lower angle so you
could see that there is about 1/8" distance between the motor mount bolt and the
new hose/fitting combination. Hope this helps. Paul
Conner
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.3 - Release Date: 1/24/2005
|