----- Original Message -----

From: jesse farr

To: Rotary motors in aircraft

Sent: Monday, January 24, 2005 10:10 AM

Subject: [FlyRotary] Re: Flex plate <> Flywheel [FlyRotary] Re: flex plate

Aren't there six (6) bolts holding triangular drive plate to flex plate on these ? jof

you can remove the triangular piece with the drive spline without removing the flex plate (its held to the flex plate with 3 bolts)  You can not mount the triangular piece on the flex plate before mounting the flex plate to the engine because then you have no access to the flywheel nut that holds the flex plate. 

---

No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.2 - Release Date: 1/21/2005