Ed,
Don’t you mean RB Wagner? (www.rbwagner.com)
Mark S.
From: Rotary motors in
aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Ed Anderson
Sent: Tuesday, January 18, 2005
1:46 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Ed
Anderson Exhaust
Hi Bill, just got back from the LakeLand RV flyin and
visiting with Tracy and Laura Crook (more on the trip later)
Yes, I used schedule 40 stainless steel pipe (304) used for
steel hand railings. The pipe was 2" OD and as best I recall the wall
was over 0.10 " but less than 0.125". I have 350 hours of use
on them and they are starting to oxidize on the exterior a bit - but have more
hours of life remaining that I can probably use up before making some
modification that results in a different/new header.
I got the pipe from RBWalker (all sorts of tubing and pipe
goodies)
----- Original Message -----
Sent: Monday, January
17, 2005 9:46 PM
Subject: [FlyRotary] Ed
Anderson Exhaust
If I recall, you used heavy guage 304-SS pipe for your
exhaust headers -- is that correct? Can you recall the OD/ID of the material
you used, and the source?
Bill Schertz
KIS Cruiser # 4045