Return-Path: Received: from envelope.rose-hulman.edu ([137.112.8.21] verified) by logan.com (CommuniGate Pro SMTP 4.2.8) with ESMTP-TLS id 611227 for flyrotary@lancaironline.net; Tue, 18 Jan 2005 02:11:50 -0500 Received-SPF: none receiver=logan.com; client-ip=137.112.8.21; envelope-from=madsena@rose-hulman.edu Received: from bob (dhcp024-160-204-151.ma.rr.com [24.160.204.151]) (authenticated (0 bits)) by envelope.rose-hulman.edu (8.11.6/8.11.6) with ESMTP id j0I7B8X04502 (using TLSv1/SSLv3 with cipher RC4-MD5 (128 bits) verified NO) for ; Tue, 18 Jan 2005 02:11:16 -0500 (EST) Message-Id: <200501180711.j0I7B8X04502@envelope.rose-hulman.edu> From: "Alex Madsen" To: "'Rotary motors in aircraft'" Subject: RE: [FlyRotary] Re: New discovery... Date: Tue, 18 Jan 2005 02:10:59 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook, Build 11.0.5510 Thread-Index: AcT9J5KzIL++sCE2TXW0t3b+ONCpvwABGxSw In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 It seems to me a good solution to this would be to add a voltage regulator that can run the ECU and EM2 at a lower voltage (say 6V). This would avoid some frustration with low batteries on the ground and I think add safety allowing longer flight times with a dead alternator. Alex Madsen -----Original Message----- From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Todd Bartrim Sent: Tuesday, January 18, 2005 1:31 AM To: Rotary motors in aircraft Subject: [FlyRotary] Re: New discovery... I believe that the EM2 is set to give this alarm. My bottom line on the screen will flash "BATTERY VOLTAGE TOO LOW" at ~9 volts, IIRC. When I'm cranking it when it's too darn cold to start, I can hear it trying to fire but as soon as the voltage drops far enough that the warning appears, it will no longer try to fire. Then out come the jumper cables :-( When Tracy finishes vacationing or building Rusty's parts or trouble shooting for John or Bernie, maybe he'll come back to us lost souls and clarify this for us. Cheers... Todd. So, given that "data point", looks like it might be useful for us folks with "computer dependent" engines, which need 9v (for this particular ECU), to fabricate a second LVM (set for 9.1 or 9.3 v) that turns on a light - or voice warning - to tell us "voltage too low to start" (i.e., below ECU minimum voltage required to start). I'd probably put the light close to the starter switch. >> Homepage: http://www.flyrotary.com/ >> Archive: http://lancaironline.net/lists/flyrotary/List.html