|
|
Seems if you run the engine much above 5000 RPM and slosh the oil around the pan (bit of yanking and banking) you'll see oil coming out the vent. Do you have a plate between the engine and oil pan?
If the amount oil vented is the same as amount scavanged from the gas/oil mixture, just consider yourself lucky that you don't have to drain oil between oil changes and consider it an anti-corrosion measure. Oh, never mind, you's a plastic plane.
Finn
Steve Brooks wrote:
Rusty,I'll have to take a look at this more when I get
back home. I'm staying with freinds and using their
computer, which is definitely bandwidth challenged.
I don't like the sounds of the side seal issue, but I
hope it is something simple. I've got about 12 hours
on the engine since overhaul, and don't know why I
would have a side seal issue now, but who knows.
One thing that I forgot to mention.... it only does it
while flying. I ran it on the ground with the cowling
off for a total of 15 minutes or so. Not a drop. That included some full power runs up to about 40 kts
or so.
Maybe the hose location is the issue and has to have
flying speeds ? Don't know. Wishful thinking maybe
Steve
--- Russell Duffy <13brv3@bellsouth.net> wrote:
|
|