|
|
Finn Lassen wrote:
From my limited experience (taking apart 5 and putting together 4 times), the time consuming part is the cleaning.
Once you've got it apart you'll feel obligated to clean rotors, seals, etc. Otherwise it's easy to take apart and put together in a short weekend.
Finn
I've heard several comments about cleaning carbon. I don't know if I'll have that problem, but I wanted to share an idea that I got off of one of those DIY shows. The topic was about cleaning a grill, and several options were given:
1--oven cleaner
2--wrap in paper towels, spray down with ammonia, seal in aluminum foil for several hours.
3--wrap in aluminum foil and back on high heat for several hours
Would any of these present major drawbacks to cleaning a rotor without all the elbow grease?
--
http://www.ernest.isa-geek.org/
"This is by far the hardest lesson about freedom. It goes against
instinct, and morality, to just sit back and watch people make
mistakes. We want to help them, which means control them and their
decisions, but in doing so we actually hurt them (and ourselves)."
|
|