Received-SPF: pass
 receiver=logan.com; client-ip=205.152.59.64; envelope-from=sqpilot@bellsouth.net
Message-ID: <001101c4e48f$f3326940$402cd6d1@paul52u7f5qyav>
From: "Paul" <sqpilot@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-571098@logan.com>
Subject: Re: [FlyRotary] Re: Atkins
Date: Fri, 17 Dec 2004 17:27:17 -0600
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=original
Content-Transfer-Encoding: 7bit

Hi, Joe....yes, I would LOVE to have a set of the bellmouths.  I have room 
for them under my cowling.  You're alright, Joe....what a wonderful group we 
have here that jumps in to help each other out.  I hope I can return the 
favor soon.  Paul Conner

Paul Conner
5181 Southern Oaks Trail
Grand Bay, AL 36541

Please advise how much money to send, and where to send it.  Thanks again. 
Paul Conner

----- Original Message ----- 
From: "Joe Hull" <JoeH@PilgrimTech.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Friday, December 17, 2004 10:38 AM
Subject: [FlyRotary] Re: Atkins


> If you want a pair of those "bell mouths" I could gift you with a
> couple. I got them from Atkins thinking I could use them on my setup.
> But there just isn't room.  A problem with the straight in manifold
> from Atkins is just that - it sticks straight out. Sticking out isn't
> a problem on a box nosed RV - but for us pushers - we're trying to
> taper the cowl to a point in the back to let our fans breath. As it is
> I had to put a little bump on my cowl to accommodate the fuel rail.
>
> Thanx,
> Joe Hull
> Bellevue (Seattle), Washington
> Cozy MkIV #991 (working on Engine & Electrical & Finishing)
> http://www.maddyhome.com/canardpages/pages/JoeHull/index.html
>
>
>> -----Original Message-----
>> From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
>> On Behalf Of Paul
>> Sent: Friday, December 17, 2004 8:29 AM
>> To: Rotary motors in aircraft
>> Subject: [FlyRotary] Re: Atkins
>>
>> Thanks for the picture of Atkin's intake manifold/installation,
>> Joe....I was
>> considering the bell mouths for the intakes, now I see what they
>> look like
>> and have an idea of xsize, etc.  Thanks again for taking the time to
>> find
>> and send the picture.  Paul Conner
>>
>> ----- Original Message -----
>> From: "Joseph M Berki" <Joseph.M.Berki@grc.nasa.gov>
>> To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
>> Sent: Thursday, December 16, 2004 5:15 AM
>> Subject: [FlyRotary] Re: Atkins
>>
>>
>> > Someone is looking for Dave's installation as it was at Osh, I
>> attached a
>> > pic.  Hope this helps.
>> >
>> > Joe Berki
>> > LimoEZ
>> >
>> > At 09:11 AM 12/15/2004 -0800, Joe Hull wrote:
>> >>Paul -
>> >>Yes, David had/has a heat shield under his intake manifold. I have
>> a
>> >>bunch of pictures - just not with me at work.  The only two
>> >>semi-relevant pics I have on my laptop here are from his old
>> setup. He
>> >>changed his engine installation last Spring/Summer and had the new
>> >>setup at Oshkosh.  The attached pics don't directly show his heat
>> >>shield - but you can see it through the manifold on one and it's
>> in
>> >>the lower left on the other one.
>> >>
>> >>If David isn't able to get pics of his new install to you I'll see
>> if
>> >>I've got any at home from Osh-2004.
>> >>
>> >>Thanx,
>> >>Joe Hull
>> >>Bellevue (Seattle), Washington
>> >>Cozy MkIV #991 (working on Engine & Electrical & Finishing)
>> >>http://www.maddyhome.com/canardpages/pages/JoeHull/index.html
>> >>
>> >
>>
>>
>> --------------------------------------------------------------------
>> ------------
>>
>>
>> >>>  Homepage:  http://www.flyrotary.com/
>> >>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>> >
>>
>>
>>
>> >>  Homepage:  http://www.flyrotary.com/
>> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>
>
>>>  Homepage:  http://www.flyrotary.com/
>>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>