Return-Path: Received: from fed1rmmtao08.cox.net ([68.230.241.31] verified) by logan.com (CommuniGate Pro SMTP 4.2.5) with ESMTP id 568757 for flyrotary@lancaironline.net; Wed, 15 Dec 2004 13:12:03 -0500 Received-SPF: none receiver=logan.com; client-ip=68.230.241.31; envelope-from=ALVentures@cox.net Received: from BigAl ([68.7.14.39]) by fed1rmmtao08.cox.net (InterMail vM.6.01.04.00 201-2131-117-20041022) with ESMTP id <20041215181133.RWXJ27771.fed1rmmtao08.cox.net@BigAl> for ; Wed, 15 Dec 2004 13:11:33 -0500 From: "Al Gietzen" To: "'Rotary motors in aircraft'" Subject: RE: [FlyRotary] Re: Injectors Date: Wed, 15 Dec 2004 10:11:49 -0800 Message-ID: <000501c4e2d1$8c378eb0$6400a8c0@BigAl> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0006_01C4E28E.7E144EB0" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.6626 Importance: Normal In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 This is a multi-part message in MIME format. ------=_NextPart_000_0006_01C4E28E.7E144EB0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable =20 =20 -----Original Message----- From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Tracy Crook Sent: Wednesday, December 15, 2004 9:23 AM To: Rotary motors in aircraft Subject: [FlyRotary] Re: Injectors =20 Remember, ONLY the 20B has a staging relay.=20 =20 Oops; I guess I forgot. =20 Al If you want to do this on a 13B installation, swap the pri & sec = injector lines at the EC2 connector or swap the injector connectors if you have enough wire slack to do this. =20 Tracy =20 ----- Original Message -----=20 From: Al Gietzen =20 To: Rotary motors in aircraft =20 Sent: Wednesday, December 15, 2004 12:13 PM Subject: [FlyRotary] Re: Injectors =20 Subject: [FlyRotary] Re: Injectors =20 My solution was to simply move the staging relay from the secondary = power circuit to the primary power circuit, so it runs on the secondary at low power and all 6 at higher power (20B). Problem solved. This may not be a solution for every case, as my secondary injectors are = not all that far from the ports. =20 Hi Al, I have the same injectors like you. How do you do the = modification with the relay? Buly;=20 The staging relay normally switches the power on or off to the secondary injectors. Just wire your primary power lead through the relay instead. Everything else remains the same. I was about to change my wiring harness so the I had enough length to = switch primary and secondary when suddenly the light came on (in my head), and = I realized I only had to change the power lead. Al ------=_NextPart_000_0006_01C4E28E.7E144EB0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Re: [FlyRotary] Re: Injectors

 

 

-----Original = Message-----
From: Rotary motors in = aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Tracy Crook
Sent: Wednesday, December 15, 2004 9:23 AM
To: Rotary motors in = aircraft
Subject: [FlyRotary] Re: = Injectors

 

  Remember, ONLY the 20B has a staging relay. 

 

Oops;   I guess I = forgot.

 

Al

 If you want to do this on a 13B installation, swap the pri & sec = injector lines at the EC2 connector or swap the injector connectors if you = have enough wire slack to do this.

 <= /font>

Tracy &nb= sp;

=

----- Original Message -----

From: Al Gietzen

Sent: Wednesday, = December 15, 2004 12:13 PM

Subject: [FlyRotary] Re: Injectors

 <= /font>

Subject: [FlyRotary] Re: Injectors

 

My = solution was to simply move the staging relay from the secondary power circuit to = the primary power circuit, so it runs on the secondary at low power and all = 6 at higher power (20B). =  Problem solved.
This may not be a solution for every case, as my secondary injectors are = not all that far from the ports.
 

Hi Al, I have the same injectors like = you. How do you do the modification with the relay?<= /p>

Buly;

The staging relay normally switches the = power on or off to the secondary injectors.  Just wire your primary power = lead through the relay instead. Everything else remains the = same.

I was about to change my wiring harness = so the I had enough length to switch primary and secondary when suddenly the = light came on (in my head), and I realized I only had to change the power = lead.

Al

------=_NextPart_000_0006_01C4E28E.7E144EB0--