Received-SPF: pass
 receiver=logan.com; client-ip=205.152.59.69; envelope-from=sqpilot@bellsouth.net
Message-ID: <009101c4df39$166404c0$792cd6d1@paul52u7f5qyav>
From: "Paul" <sqpilot@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-562603@logan.com>
Subject: Re: [FlyRotary] Re: In-line Oil Filter - reprise
Date: Fri, 10 Dec 2004 22:22:29 -0600
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=original
Content-Transfer-Encoding: 7bit

Keep up the good work, Dale...I would rather throw business your way than to 
Mazdatrix or Racing Beat....gotta take care and support our own, you know. 
Paul Conner

----- Original Message ----- 
From: "Dale Rogers" <rogersda@cox.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Friday, December 10, 2004 1:42 PM
Subject: [FlyRotary] Re: In-line Oil Filter - reprise


>
>> From: Finn Lassen <finn.lassen@verizon.net>
>> Date: 2004/12/10 Fri AM 10:19:06 EST
>> To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
>> Subject: [FlyRotary] Re: In-line Oil Filter - reprise
>>
>> Hard to see in the picture, but looks like the o-rings have nothing to
>> seat on in part of the holes.
>
> Indeed.  I'm making a gasket instead.
>
> However, I may yet be able to provide a surface for the
> o-ring.  The present cutout is undersized.  At the time,
> I only had a 3/4" end mill for cutting it, but it's
> supposed to be 2.0cm.  I put in an order for the correct
> size cutter with Rutland.  If I'm very careful, I think I
> can leave a 2mm seating surface all the way around.  If
> not, the gasket will work every bit as well.
>
>> BTW, Racing Beat or Mazdatrix sells these.
>
> Yes, and after I get the bugs worked out of the production
> process, there'll be a third source.
>
> As I mentioned in an earlier message, I'm almost done with
> one that offers two threaded bosses for sensors or remote
> feeds.  If someone wants one with three bosses, I can do
> that, too.  I have to be out-of-town next week, but I
> should have more stuff to display after Christmas.
>
> Dale R.
> COZY MkIV #1254
>
>
>
>>>  Homepage:  http://www.flyrotary.com/
>>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>