|
|
On Fri, 5 Nov 2004 18:49:53 -0600
"Russell Duffy" <13brv3@bellsouth.net> wrote:
I think Rusty is running an EWP in addition to the mechanical pump. Any others? Any advice?
I need to finalize my design.
Thanks,
Bob White
Thanks for reminding me to test my EWP without the mechanical pump. I'm installing the cowl cheek extensions, and reworking the oil cooler
scoop and TB air inlet over the next week or so. When I do my full
throttle ground test of the new TB inlet, I'll also do a test where I
pull the alt/wp belt to make sure it seems to cool, and see if I get
any more rpm (fat chance) with only the EWP. Cheers,
Rusty
Hi Rusty,
I'm looking forward to hearing how that works out. I'm considering the
Meziere WP337, or two WP116's. I have my evaporator cores set up for
AN16 fittings. I haven't quite figured out whether I can get any of the
Meziere pumps to use AN16 for inlet and outlet directly, or whether I
will have to make external adaptors.
Bob White
--
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (soon)
|
|