Mailing List flyrotary@lancaironline.net Message #12595
From: keltro@att.n <keltro@att.net>
Subject: Re: [FlyRotary] Re: Voltage and noise
Date: Sat, 06 Nov 2004 00:20:29 +0000
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Al,
  What are you using for a voltage regulator?
--
Kelly Troyer
Dyke Delta/13B/RD1C/EC2




-------------- Original message from "Chuck" <crayd@cableone.net>: --------------

That voltage is OK, but I would not want to see it much above 15V for a long period of time, as it may start gassing, that would shorten life especially if it is a sealed battery. OTOH anything above 14.2 volts does nothing to increase the state of charge.
 
Chuck Dunlap
RV6 13B
-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Al Gietzen
Sent: Thursday, November 04, 2004 12:24 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Voltage and noise

I find that my alternator is maintaining voltage at 14.6-14.8.  This seems a bit high, but is it a problem?  The only thing I can think of is that it may reduce battery life.

 

For you other guys with composite airplanes, especially those with the engine in the back (where it is supposed to beJ), and battery in front; are you finding any noise problems in avionics that may be resulting from the EC2 injector/ignition leads?  Anticipating the need for some filtering.

 

Al

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster