|
|
In a message dated 3/20/2003 5:21:50 PM US Eastern Standard Time, 13brv3@mchsi.com writes:
But the issue that ended my studies of the oil/water approach is that the
available exchangers (Fluidyne, Setrab, others) had large pressure drops at
the flows we need in the rotary; at least for the 20B in my case. Al
-------------------
I tried a Callies water to oil exchanger in the race car. It worked fine. It made the oil temp and water temp the same. Unfortunately they were the same at 200 degrees. That with a Griffen aluminum radiator 19"X31"X two rows. The 200 degree oil was OK but 200 degree water is not. It was also very heavy. I cut it open and recovered the air/oil cooler and it now cools the transmission oil. Lynn E. Hanover
|
|