|
Message
Rusty has AN16 male fittings with no trouble. (correct Rusty?)
Hope this helps a little. Tommy James<><
Actually, I used AN12
fittings, but I think Ed has AN16's. AN12 is probably easier for the
novice welder, because it stays farther from the oven brazed seams. I'm running
two cores in series, and this doesn't seem to cause any restriction problems,
even with AN12. I used AN16 on the previous radiator, but wouldn't go back
to that.
Cheers,
Rusty (time for more of
that experimental crap)
|