Return-Path: Received: from mail.tsisp.com ([65.23.108.44] verified) by logan.com (CommuniGate Pro SMTP 4.2) with ESMTP-TLS id 395705 for flyrotary@lancaironline.net; Mon, 06 Sep 2004 17:59:11 -0400 Received-SPF: none receiver=logan.com; client-ip=65.23.108.44; envelope-from=steve@tsisp.com Received: from stevehome by mail.tsisp.com (Technical Support Inc.) with SMTP id CQA74584 for ; Mon, 06 Sep 2004 17:58:39 -0400 Reply-To: From: "Steve Brooks" To: "'Rotary motors in aircraft'" Subject: RE: [FlyRotary] Re: Water pump problem Date: Mon, 6 Sep 2004 18:00:44 -0400 Message-ID: <002401c4945c$f5ff2e20$6400a8c0@WORKGROUP.local> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0025_01C4943B.6EED8E20" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0) Importance: Normal In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 This is a multi-part message in MIME format. ------=_NextPart_000_0025_01C4943B.6EED8E20 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit If you just insist on doing the tube thing, May I suggest the following: Hot liquid rises, which is why we're saying it stays on top. Why not leave the inlet alone, and put the tube only in the outlet side, so it extends within a couple inches of the bottom. Rusty, Actually, the tank on the other end of both cores have a plate going across about 2" below the top of the core. Not having seen one cut apart, my assumption was that the tube on the other end, forced the liquid to the bottom of the core, where it flow across, up, across, and out ? I think I got dizzy just explaining that theory. Don't all cores have these plates ? These are GM evaporator cores, though the size varies by a ?" they are pretty close to the same size. Both had the tubes on each end coming out of the top, which is why I went with these particular ones. Steve ------=_NextPart_000_0025_01C4943B.6EED8E20 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Message

If you just insist <G> on = doing the tube thing, May I suggest the = following:   Hot liquid rises, which is why we're saying it stays on top.   Why not = leave the inlet alone, and put the tube only in the outlet side, so it extends = within a couple inches of the bottom. 

 

Rusty,

Actually, the tank on the other end of both cores have a plate = going across about 2” below the top of the core.  Not having seen one cut apart, my assumption was that the tube on = the other end, forced the liquid to the bottom of the core, where it flow = across, up, across, and out ?  I think = I got dizzy just explaining that theory.

 

Don’t all cores have these plates ?  These are GM evaporator cores, though the size varies = by a ¼” they are pretty close to the same size.  Both had the tubes on each end coming out of the top, which is = why I went with these particular ones.

 

Steve

 <= /p>

 <= /p>

------=_NextPart_000_0025_01C4943B.6EED8E20--