----- Original Message -----
Sent: Friday, August 20, 2004 8:21
PM
Subject: [FlyRotary] Re: EM-2 MAP
readings
Also going with a TWM TB, the model
3003. Setting it up for one injector per rotor. Going with 72 lb
injectors and 57 mm bores. Not flying yet. Hope this may help. Will try
to bring it down to Tracy's in October.
Barny
MGDQ 20bt
I just looked up the 3003 TB, and they only list 40,
44, 46, and 48 mm bores. Are you
sure it's 57 mm? That should certainly be big enough :-)
Cheers,
Rusty (shopping for SlingShot
engines)
Rusty,
OOOPS...Just miked it out. It is 48mm. Also
checked out my intake manifold at 2" or 51mm. Will be running 2" for
runners. Isn't it wonderful going back and forth from metric to
inches.
Barny
MGDQ 20bt
This message scanned for viruses by
CoreComm