Rod, I don't know the answer to that but I can say that my magnetometer was pretty much inop until I removed the steel nutplates at the corners of the tray that was holding it. ...might want to consult with Garmin.
On Jun 18, 2011, at 5:32 PM, Rod Pharis wrote: Sounds OK to me, just make sure you get a non-magnetic Stainless Steel alloy. Rod From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Leanna Eversmeyer Sent: Friday, June 17, 2011 9:45 AM To: lml@lancaironline.net Subject: [LML] Legacy Rudder Cables Seeking advice for installation of a dual screen Garmin G3X system in a Lancair Legacy RG. I built a shelf to mount the magtrometer about 2 ft aft of the baggage bulkhead. This puts it about one ft above where the rudder cables come out, along the sides of the aircraft. The Legacy kit comes standard with galvanized steel rudder cables. Do I need to replace these with stainless steel cables to eliminate any interference with the magtrometer?
|