1. Clean the pin hole with Acetone
2. Take RTV and fill over the pin hole.
3. Clean with Acetone again
4. Take a little RTV and smear it around the hole then take a very small piece of Peel Ply and place to the RTV and seal.
5. Take a little RTV and smear it around the edges of the Peel Ply and let stand over night.

Second problem: I have a small pin hole in  the “sidewall” of my door pressure seal. It’s so small that the seal will retain pressure for a short period, causing the pressurization pump to cycle on every few seconds. I would like to hear from anyone that’s  tried to patch such a hole.

 

 

 

 

 

Many thanks in advance,