X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Sat, 18 Jun 2011 20:32:00 -0400 Message-ID: X-Original-Return-Path: Received: from mailout-us.gmx.com ([74.208.5.67] verified) by logan.com (CommuniGate Pro SMTP 5.4.0) with SMTP id 5024732 for lml@lancaironline.net; Sat, 18 Jun 2011 17:42:02 -0400 Received-SPF: none receiver=logan.com; client-ip=74.208.5.67; envelope-from=cfi@instructor.net Received: (qmail 19005 invoked by uid 0); 18 Jun 2011 21:41:28 -0000 Received: from 184.88.13.235 by rms-us013.v300.gmx.net with HTTP Content-Type: multipart/alternative; boundary="========GMXBoundary4281130843328867559" X-Original-Date: Sat, 18 Jun 2011 21:41:27 +0000 From: "Ron Galbraith" X-Original-Message-ID: <20110618214128.42810@gmx.com> MIME-Version: 1.0 Subject: Re: [LML] Door Seal on the IV-P X-Original-To: "Lancair Mailing List" X-Authenticated: #73491717 X-Flags: 0001 X-Mailer: GMX.com Web Mailer x-registered: 0 X-GMX-UID: uyzPfI04hTXpYSAAFWNr5vdSa2FkZlXL --========GMXBoundary4281130843328867559 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit * Clean the pin hole with Acetone * Take RTV and fill over the pin hole. * Clean with Acetone again * Take a little RTV and smear it around the hole then take a very small piece of Peel Ply and place to the RTV and seal. * Take a little RTV and smear it around the edges of the Peel Ply and let stand over night. Second problem: I have a small pin hole in the “sidewall” of my door pressure seal. It’s so small that the seal will retain pressure for a short period, causing the pressurization pump to cycle on every few seconds. I would like to hear from anyone that’stried to patch such a hole. Many thanks in advance, --========GMXBoundary4281130843328867559 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable

=20 Clean the pin hole with Acetone
=20 Take RTV and fill over the pin hole.
=20 Clean with Acetone again
=20 Take a little RTV and smear it around the hole then take a very small pie= ce of Peel Ply and place to the RTV and seal.
=20 Take a little RTV and smear it around the edges of the Peel Ply and let s= tand over night.

=20
=20

=20
=20
=20
=20 Second problem: I have a small pin hol= e in the =E2=80=9Csidewall=E2= =80=9D of my door pressure seal. It=E2=80=99s so small that the seal will r= etain pressure for a short period, causing the pressurization pump to cycle= on every few seconds. I would like to hear from anyone that=E2=80=99s tried to patch such a hole.
=20
=20 =C2=A0
=20
=20 =C2=A0
=20
=20 =C2=A0
=20
=20 =C2=A0
=20
=20 =C2=A0
=20
=20 Many thanks in advance,
=20
=20 =C2=A0
=20
=20
=20

=20 --========GMXBoundary4281130843328867559--