Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Tue, 14 Jun 2011 12:36:00 -0400
Message-ID: <redirect-5020201@logan.com>
Received-SPF: softfail
 receiver=logan.com; client-ip=206.46.173.9; envelope-from=bruceryan@msn.com
MIME-version: 1.0
Content-transfer-encoding: 8BIT
Content-type: text/plain; charset=windows-1252; format=flowed
From: Bruce Ryan <bruceryan@msn.com>
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.15)
 Gecko/20110303 Thunderbird/3.1.9
Subject: LIV-P Panel Cad Files

Colyn
I am not sure what you want to do, but thought I would pass along a few 
thoughts for your consideration.

Stein has an IVP CAD file that I helped “tune” for the Garmin G900.
In addition he has the ability to rapidly provide pdf”s ,then full size 
paper and/or Lexan templates cut to your spec that you can physically 
fit the bits to. This step turned out to be very important.

I designed my panel and considered doing all of the CAD/CAM related 
stuff myself since I had a local “friend of a friend” with a CAD/CAM set 
up. I quickly came to the conclusion that it would be a big job for many 
reasons and my efforts were best directed elsewhere. As the saying goes 
“your mileage may vary”

If you are considering a new panel, talk to Stein. I have been very 
pleased and very impressed with Stein from start to finish. He will take 
the time to walk you through the options, encourages folks to build as 
much of the panel as they are comfortable with, and has a great staff 
that quickly and accurately responds to questions. I am very happy with 
the panel I have and the process to get there. It has been a highlight 
of the program for me

Regards
Bruce