Mailing List lml@lancaironline.net Message #9272
From: Ed McCauley <ed.mccauley@bltinc.com>
Subject: yet ANOTHER CW question!
Date: Thu, 5 Apr 2001 11:51:41 -0400
To: <lancair.list@olsusa.com>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
After reading all about the counterweight weight issues AND the 'curve the
leading CW horn' issue, I've come up with a plan.  Any and all comments are
welcome.  BTW, this is for a IV-P.

The CW horn is 2" high.  I found some PVC pipe just a bit smaller and I plan
to use it with some plaster to create a 1/2 round mold into which I'll be
pouring lead.  Next I'll drill the 1/2 round weights and lag bolt (two bolts
per side from the front) them into the existing lead in the CW area.
Finally, I plan to wrap 1 or 2 layers of carbon from the EL trailing edge,
around the leading edge of the CW horn and back to the trailing edge for a
bit of extra strength and rigidity.

What do you all think?

Ed McCauley
Milford, NJ
Lancair IV-P -23.493 +/- 30% Complete



>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster