<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>

In a message dated 2/18/01, Scott Krueger wrote:

<< He had the hot air enter from the front and tried to
"wastegate" unused air to the side.  This will not work.  Hot air must enter
the side and unused air must exit the front.  If you are having a heat
problem, check this out.>>

Doh!   I say again, "DOH!"

This is exactly my problem.  If I re-examine the cabin heat valve, I see that
the "design problem" I referred to is cured in this manner.  The
"manufacturing defect" is not, but I can fix this by straightening out the
flipper plate (whatever it's called) if I have to.  First, however, I'll
connect it to the exhaust of my vacuum cleaner and see if the small gap is a
problem.  It may actually be just fine.

Thanks a lot, Scott!

- Rob Wolf
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>