<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
   I'm building a legacy and in the instructions, it
calls for a hole 1 3/16" wide x 2 1/2 high to be cut
in the center of the aft spar with the top of the hole
meeting the bottom of the spar cap.  The hole is to be
1/2" to the LEFT of the center line, however, I
misread the plans and made the hole 1/2" to the RIGHT
of the center line.  I called Mark and he said that
was not a good thing, because it would weaken the
spar, but that it would be okay as long as I didn't do
it again.
   I am basically wanting second and third opinions
about whether or not I have critically damaged the
spar, as I am very hesitant to simply let this go by
without being 110% sure.

Aaron May
Legacy N589SF

__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - Buy the things you want at great prices.
http://auctions.yahoo.com/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>