<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
I mounted my hydraulic quadrant first and then located the lower panel ahead
of the fuel valve, making either removable with the other in place.  On top
of that I mounted the main panel frame in a vertical position.  The gyro
horizon wants it so.
The panel needed to be cut out to fit over the aileron torque tubes and I
used those two pieces of material to mount the panel to the fuselage.  I set
those two 90 degree fiberglass pieces onto the fus sidewalls with flox,
phenolic and hi-locs to get the correct angle and cut the expansion grooves
into them after they were mounted.
I'll forward pics if you want.
Walter Dodson

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>