<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Dick needs to get the trim system back in stock!  If you can't wait, the
prototype to his system is of my design and uses off the shelf gears with
the exception of a large 118 tooth which you would have to have cut at a
gear shop.  See page 243 of the Lancair Network News for the supplier &
part numbers and drawing of the geared trim system.  The home built geared
trim system has worked well in N71JF.

Dick's trim system is a nicer looking unit however and would be worth the
wait.  Assuming you made your own, the parts are about $50 plus the 118
tooth which might cost another $80 or more to have custom cut, plus another
30 hours of work to round up the parts, get the gear cut, and to make a
trim wheel.  Hardly seems worth the trouble when a nice unit  is already
available.

Jim Frantz
jim@angle-of-attack.com