Mailing List lml@lancaironline.net Message #70556
From: Skip Slater <skipslater@verizon.net>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Re: Safety wiring will pants
Date: Tue, 14 Oct 2014 13:09:58 -0400
To: <lml@lancaironline.net>
The bolt screws down into into the axle, so a threaded nut doesn't work.
Sent: Tuesday, October 14, 2014 8:18 AM
Subject: [LML] Re: Safety wiring will pants



Posted for Danny <danny@n107sd.com>:

>
>
> Use a drilled bolt with a castle nut. Then you can insert a cotter pin
> through the hole in the bolt and the nut can't come off.
>
> ---
> Danny
> LNC2-360
>
> On 10/13/2014 09:23, George Wehrung wrote:
>
>> I have lost my outer bolt and spacer two times now for my wheel pants on the
>>main gear.
>>
>> Has anybody considered a way to safety wire the bolt to the wheel pant the
>>bolt to prevent loosing them inflight?
>>
>> I just hope it didn't hit anybody.
>>
>> Sent from my iPad
>> --
>> For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
>>[1]
>
>
> Links:
> ------
> [1] http://mail.lancaironline.net:81/lists/lml/List.html

--

For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster