Mailing List lml@lancaironline.net Message #69632
From: Rick Argente <rickargente@gmail.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Re: Shipping the Lancair 360
Date: Sun, 30 Mar 2014 14:18:46 -0400
To: <lml@lancaironline.net>
Thanks for the heads-up Bryan! 


On Thu, Mar 27, 2014 at 7:49 AM, Bryan Wullner <vonjet@gmail.com> wrote:
I had my lancair shipped in a container from Hawaii to California. The jig that was built bolted to the spar at the wing bolt locations with a cradle at the firewall and tail. It held the plane at an angle with the gear retracted.  It could be put in and out of the container with a forklift.  The wings were in a sling and bolted to each side of the container.  Cant remember exactly how. But they were all wrapped in padding and hung. Didn't have any damage when I got it.
Bryan


On Wed, Mar 26, 2014 at 10:56 AM, Bill <billhogarty@gmail.com> wrote:
Rick

There is an outfit in Arizona that is very knowledgable  about shipping Lancairs    I can get you their info.  Let me know and I will look for it

Regards,  billhogarty

Sent from my iPad

On Mar 26, 2014, at 4:44 AM, Rick Argente <rickargente@gmail.com> wrote:

> There is a good possibility that somebody from abroad will purchase my Lancair 360.  Has anybody here at the forum done this before?  Looks like we need to ship the plane on some sort of an angle/tilt because the width of the sub-wings, wingtip to wingtip, is wider than the shipping containers.  Anybody have plans for the cradle we need to construct?
>
> Thanks,
> Rick
> N360ZR

--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html


Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster