<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Some info to share with y'all.

Kirk Hammersmith of Lancair faxed me a CAD drawing of the
throttle/prop/mixture knob spacing.  The hole centers are 2.505 inches apart
(center to center) and Lancair locates them on a subpanel that is 2.000
inches tall by 6.807 inches wide.

Hal Woodruff sent me similar info.  His knobs are 2.69 inches apart (center
to center) and his panel is 7.13 inches wide at that location.

Thanks, guys, for sharing your data, and confirming that my original layout
had them way too close (as I had suspected).

- Rob Wolf
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>