Return-Path: <lancair.list-request@olsusa.com>
Received: from dskfw2.funb.com ([168.175.254.62]) by ns1.olsusa.com
          (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35)
          with ESMTP id com for <lancair.list@olsusa.com>;
          Thu, 28 Sep 2000 08:55:05 -0400
Received: (from uucp@localhost) by dskfw2.funb.com (8.8.5/8.8.5) id JAA16901 for <lancair.list@olsusa.com>; Thu, 28 Sep 2000 09:02:02 -0400 (EDT)
Received: from clt-msw-01.funb.com(168.175.76.103) by dskfw2.funb.com via smap (V2.0)
	id xma016834; Thu, 28 Sep 00 09:01:49 -0400
Received: from cltastr02.capmark.funb.com (unverified) by clt-msw-01.capmark.funb.com
 (Content Technologies SMTPRS 4.1.5) with ESMTP id <Ta8af4c67fa4eecc3da79@clt-msw-01.capmark.funb.com> for <lancair.list@olsusa.com>;
 Thu, 28 Sep 2000 09:01:47 -0400
Received: from clt-conn-01.capmark.funb.com (unverified) by cltastr02.capmark.funb.com
 (Content Technologies SMTPRS 2.0.15) with ESMTP id <B0001828082@cltastr02.capmark.funb.com>;
 Thu, 28 Sep 2000 09:03:01 -0400
Received: by clt-conn-01.capmark.funb.com with Internet Mail Service (5.5.2650.21)
	id <R522Z5W7>; Thu, 28 Sep 2000 08:59:44 -0400
Message-Id: <CA33F0348ED9D21187CF0008C7CF284C02AA5FDC@clt-exch-05.capmark.funb.com>
From: "Hapgood, Matt" <matt.hapgood@funb.com>
To: "'alphadog@nii.net'" <alphadog@nii.net>, lancair.list@olsusa.com
Subject: Vision Micro Problems
Date: Thu, 28 Sep 2000 08:59:43 -0400
X-Mailing-List: lancair.list@olsusa.com
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
re: VisionMicro shut off at low voltage.

When I first start my engine, the starter appears to draw so much power that
the VisionMicro shuts down.  This is very annoying, as it takes about 5 or
10 seconds to reboot, during which time their is no RPM, oil pressure...
monitoring available.

Has anyone else experienced this or know of a solution?

Thanks,

Matt

-- According to the factory, low voltage is not the cause of erroneous
-- readings. If the unit sees 10 volts, it's happy, otherwise, it shuts off.


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>