<x-flowed>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
I need a little advice in picking a good location for my VMS fuel
flow transducer. For a fuel injected engine, the VMS manual says to
mount it between the fuel control unit and the flow divider. I would
prefer to mount mine between the gascolator and the engine-driven
fuel pump instead. The pressure might be lower at this location, but
the fuel flow will be the same, since I have no bypass pluming that
returns fuel to the tank. Does anyone see a problem with this
location?

Mike Reinath
Std. build 360 MkII 90%
N3602M
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
</x-flowed>