Received-SPF: pass
 receiver=logan.com; client-ip=213.199.154.248; envelope-from=rpastusek@htii.com
Received-SPF: pass (mail11-db9: domain of htii.com designates 157.56.245.5 as permitted sender) client-ip=157.56.245.5; envelope-from=rpastusek@htii.com; helo=CH1PRD0710HT002.namprd07.prod.outlook.com ;.outlook.com ;
From: Robert R Pastusek <rpastusek@htii.com>
To: Lancair Mailing List <lml@lancaironline.net>
Subject: RE: [LML] Chelton and TAWS
Thread-Topic: [LML] Chelton and TAWS
Thread-Index: AQHOkVr4WBTFXVNnt0W5NQ+Vu9r+eZmJx8Og
Date: Wed, 7 Aug 2013 14:02:40 +0000
Message-ID: <41361035E6613244A377D5AC3BF5EFDD66896341@CH1PRD0710MB367.namprd07.prod.outlook.com>
References: <list-6403258@logan.com>
In-Reply-To: <list-6403258@logan.com>
Accept-Language: en-US
Content-Language: en-US
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
MIME-Version: 1.0

John,

Several possibilities here. First, TAWS is definitely functional with the P=
inPoint ADAHARS.=20

First possibility is that you don't have the displays identified correctly =
as #1 and #2 in the setup. This is an important software setting that contr=
ols lots of functions, and correct switching/relay between multiple display=
s. Check this first as a potential source of both problems below. It gets a=
 good bit more complex/involved after this...

Bob

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of John=
 Barrett
Sent: Sunday, August 04, 2013 5:38 PM
To: lml@lancaironline.net
Subject: [LML] Chelton and TAWS

Has anyone else experienced TAWS failure with Pinpoint system and Chelton M=
FDs where the GPS and all other functions seem to be fine?   I don't really=
 know if I ever got TAWS with the pinpoint but am sure it was working fine =
while the X bow 500 was in play.  The problem may have been coincidental wi=
th the changeover a few months ago but I am not certain.  My understanding =
to date is that if you get GPS you should get TAWS.  One other anomaly disc=
overed is that selection of Menu on the MFD screen does not bring up the th=
e FAULTS menu.  Again, all the other submenus are normal but faults is simp=
ly missing.

Thanks
John Barrett

Sent from my iPad


--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html